VICI Precision Sampling PRESSURE-LOK® SYRINGES
Aug 13 2018 Read 1110 Times
VICI Precision Sampling Pressure-Lok® analytical syringes feature PTFE plunger tips with leak-proof seals. Self-lubricating plunger tips are designed to always remain smooth, without the seizing or residue of conventional metal plunges. Needles are sealed by PTFE sleeves that isolate samples and prevent adhesive dissolution and contamination. All Pressure-Lok® syringes feature ultrasmooth bores, easily replaceable parts, low dead volume, clear graduations, and precision calibration.
Advantages of the Series A Syringe:
- Push button valve
- Instantaneous injection
- Smaller volumes
- Ideal for small volatile samples
The A-2 Series’ push-button valve allows for sample storage of up to 250 psi in syringes as small as 25 µl. Ideal for small liquid samples containing low-boiling components otherwise lost through evaporation with ordinary syringes.
The positive rear stop, available starting at 250 µl, prevents plunger blowout at elevated pressures and protects against sample loss and operator injury. The A-2 Syringe includes all standard Pressure-Lok features: PTFE plunger tip, PTFE sealed needle, and ultrasmooth bore. Replacement components are available for quick and easy repair.
Advantages of the Magnum Syringe:
- Built-in twist-lock valve
- Seals the sample (up to 30 psi) during transportation to analysis site
- Up to 500 ml capacity
- For sampling low concentration levels
- Positive rear plunger stop
- Prevents plunger from blowing out when contents are pressurized
The Magnum Syringe has been used successfully to trap atmospheric contaminants such as sulfur dioxide and oxides of nitrogen. Specially calibrated for trace sample isolation, the Magnum Syringe’s twist-lock valve seals the sample inside the syringe to maintain its integrity during transportation to the analysis site.
The positive displacement capability of the durable PTFE plunger seal supports subsequent procedures involving extraction or concentration of trace components, e.g. cryogenic enrichment apparatus.
A female threaded fitting (1/4-28) is the standard termination, which accepts a variety of low pressure Cheminert connectors or adapters. Uniquely designed seals permit leak-proof operation of up to 30 psi (approximately 2 atmospheres).
D-140 LIQUID SYRINGE
Advantages of the D-140 Liquid Syringe:
- Designed for total sample displacement
- Includes positive rear plunger stop
- Eliminates accidental plunger removal and resultant damage
- Features modular construction
- All parts are replaceable and easy to assemble
The Series D-140 Liquid Syringe is specifically designed for small volume injections into liquid chromatographs. The entire sample is held in the needle and is totally displaced when the plunger is depressed, minimizing residuals or variation in sample size. The PTFE seals, needle, plunger, and barrel are all replaceable. Thanks to its superior alignment, the Series D-140 can easily be assembled and reassembled.
Please note: each size syringe has a different needle design, so it is important specify dimensions when ordering additional needles.
Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.
Jun 26 2019 Read 294 Times
In This Edition Mass Spectrometry & Spectroscopy - 67th ASMS Conference on Mass Spectrometry and Allied Topics - Modular MS Bench System with Integrated Gas Supply for Sciex LC-MS/MS Unveile...
View all digital editions
Aug 04 2019 Anaheim, CA, USA
Aug 04 2019 Portland, OR, USA
Aug 05 2019 Lombard, IL, USA
Aug 25 2019 San Diego, CA, USA
Sep 01 2019 Berlin, Germany