• Maximising the Use of Your Peristaltic Pump

Pumps / Valves

Maximising the Use of Your Peristaltic Pump

May 04 2021

When you purchase a peristaltic pump, you will get most use from it, if you purchase a pump that…

  • Can be used for multiple flow rate pumping applications with an easy method of switching
  • Integrates with other systems
  • Has a wide range of flow rates using multiple pump heads

Multiple Flow Rate Pumping Applications

Peristaltic pumps can be used in three different ways:

  • General pumping where the flow rate or volume is not a requirement but can be adjusted by variable speed
  • Flowrate
  • Volume dispensing

Being able to pump at accurate flow rates or volumes is very important for Bioreactors, filling Petri Dishes, and other industrial processes, such as food and drink dispensing, circulate cell suspension in fermentation, aspiration and dispensing of tissue culture media, and harvesting of cell media.

When changing between different flow rates and volumes, the pump will need to be calibrated. This should be easy to carry out.

The Lead Fluid pumps use an on-screen calibration wizard. Simply enter a flow rate and a volume and start pumping. The pump will automatically stop once the volume is reached. The collected volume can be weighed (most accurate) or measured and the volume entered into the calibration wizard.

Once the calibration process is complete the new flow rate / volume settings will be automatically updated by the wizard; allowing very precise volumes (as accurate as 1% in most cases) to be dispensed or accurate pumping flow rates (depending on the model of the pump).

Multiple Channel Pump Heads

In many applications, several pumps may be required for multiple pumping operations and different chemicals.

Most models have high torque drives to allow multiple pump heads to be fitted, thus providing simultaneous pumping from one pump. The pumps can use a wide range of tubing (Pharmaprene, Viton, Solva, Tygon, Silicon etc) depending on the viscosity of the media being pump, the length of the pumping operation and chemical compatibility. 

Integration with Other Systems

When pumps are used in manufacturing processes, it is important that they can easily integrate with existing systems for a high level of automation and greater productivity. 

All Lead Fluid pumps from our company are supplied with MODBUS RS485 to allow easy integration into laboratory and plant processes, as well as relay and voltage level control. If a pump is not easily accessible, it can be controlled using the free Lead Fluid Wi-Fi remote control apps on Android or iOS phones.

Clinical Lab Products

Clinical Lab Products sell the Lead Fluid BT “L” series and “F” series pumps which provide flow rates from sub-microlitre volumes to 13L/min for laboratory applications and up to 300L/min for industrial batch transfer processes.

For further details, please contact us here.


Digital Edition

Lab Asia 31.2 April 2024

April 2024

In This Edition Chromatography Articles - Approaches to troubleshooting an SPE method for the analysis of oligonucleotides (pt i) - High-precision liquid flow processes demand full fluidic c...

View all digital editions

Events

Microbiology Society Annual Conference 2024

Apr 08 2024 Edinburgh 2024

analytica 2024

Apr 09 2024 Munich, Germany

ChemBio Finland 2024

Apr 10 2024 Helsinki, Finland

Analytica Anacon India & IndiaLabExpo

Apr 15 2024 Mumbai, India

Analitika Expo 2024

Apr 16 2024 Moscow, Russia

View all events