Process analyzer dedicated to Ortho- and Total phosphate phosphorus analysis (DIN EN ISO 6878:2004-09)

Feb 28 2017 Read 800 Times

Metrohm Process Analytics presents the 2035 Process Analyzer, an integrated solution for 24/7 online-monitoring of critical chemical parameters such as ortho- and total phosphate phosphorus in wastewater streams. Three fixed ranges are available for Low, Standard, and High TP situations.

Phosphorus measurement according to DIN EN ISO 6878:2004-09

Phosphorus removal is essential in wastewater treatment plants to ensure the environment is not harmed by discharged effluent. In the treatment facility it is important to know the o-PO4-P concentration in the influent stream to accurately determine the amount of reagents needed for chemical treatment. For regulation compliance purposes, treated effluent is monitored for TP—the sum of all insoluble and dissolved phosphates present. The 2035 Process Analyzer utilizes a compact digestion cuvette photometer module to monitor both o-PO4-P and TP online according to DIN EN ISO 6878:2004-09. The analyzer is configured to digest and oxidize wastewater samples in order to free orthophosphates from organics, and further reagents are added after the digestion step. Phosphomolybdic acid is formed, then reduced which enables a colorimetric determination of the intensely blue-colored complex.

Various monitoring ranges for the whole facility

The 2035 Process Analyzer can measure phosphorus concentrations online via colorimetric detection in three ranges: Low TP: 0–150 μg/L PO4-P, Standard TP: 0–5 mg/L PO4-P, or High TP: 0–100 mg/L PO4-P. From seriously polluted waste streams to the analysis of effluent after chemical treatment, the 2035 is ready to tackle the challenge. This analysis can also be combined with additional measuring techniques such as pH and/or conductivity measurement, offering a more complete snapshot of your treatment process.

Robust design (IP66)

Strict separation of wet part and electronics ensures safe operation in harsh environments. The electronics part is housed within non-corrosive epoxy-coated stainless steel.

Virtually unlimited sample conditioning options

Metrohm Process Analytics provides virtually any sample pre-conditioning system, such as cooling or heating, pressure reduction, degassing, filtration, and more. The new system is entirely modular by design enabling custom configurations for monitoring single or multiple process streams.

Sophisticated data communication

Ethernet TCP/IP Network communication and remote operation, web services, MODBUS, analog outputs, digital outputs to transmit results, and alarm status signals. Result export to USB.

For more information, visit metrohm, and download our free Process Application Note AN-PAN-1039.

Read comments0

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.

Digital Edition

International Labmate January/February 2018

February 2018

In This Issue... Chromatography - Automation and Liquid Chromatography - FID Gas Station - New GC Gas Calculator Introduced Mass Spectrometry & Spectroscopy - The Forensics 664 vMetho...

View all digital editions


Biotech World

Feb 19 2018 Moscow, Russia


Feb 26 2018 Orlando, Fl, USA


Mar 01 2018 Singapore


Mar 04 2018 Guanghzou, China

View all events