Laboratory Products

  • Optimal size-reduction of different materials due to variable rotational speed
    Universal Cutting Mill PULVERISETTE 19 with variable rotational speed adjustment
  • New FRITSCH small volume Cyclone separator for optimal sample exhaustion
  • For residue-free cleaning all grinding parts can be removed within seconds without tools

Optimal size-reduction of different materials due to variable rotational speed

May 03 2019 Read 267 Times

Two NEW Universal Cutting Mills are available with variable rotational speed enabling fine tuning of the comminution process for each sample within a very wide range of applications or for extremely powerful comminution and gentle thermal load without a high fine share and that with an unmatched ease of cleaning. All versions are characterised for fast and safe comminution with various knife geometries, replaceable blades for maximum flexibility and durability and the practical sieve cassette determine the desired final fineness.

Variable 300-3000 rpm for fine comminution

The high-speed Universal Cutting Mill PULVERISETTE 19 comminutes up to 60 l/h of soft to medium-hard sample materials and fibrous materials at a torque of up to 30 Nm with reliable reproducible results. The great advantage: The variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm enables fine tuning of the comminution process for each sample within a very wide range of applications.

Variable 50-700 rpm for powerful comminution

The low-speed Universal Cutting Mill PULVERISETTE 19 with variable rotational speed adjustment between 50-700 rpm and a torque of up to 67 Nm enables due to the combination of low cutting rate and extreme cutting forces a very powerful comminution of hard, tough-elastic samples and small sample quantities. At the same time, it is the ideal solution for all cases where e.g. thermal damage, the loss of highly volatile substances, or an excessively high fine share need to be avoided.

FRITSCH-Advantage: Cold comminution – embrittlement

Due to the well-conceived instrument design and the materials used, it is no problem to comminute pre-cooled materials or samples embrittled with liquid nitrogen. The improved breaking behaviour enables efficient comminution also of sticky, tough-elastic or temperature-sensitive materials with dry ice or after previous embrittlement of the sample with liquid nitrogen.

Optimal sample exhaustion: FRITSCH Cyclone separators

Clean, convenient, cool: Combine your FRITSCH Universal Cutting Mills PULVERISETTE 19 with a FRITSCH Cyclone separator for sample exhaustion and an exhaust system which can be ordered along. The strong airflow ensures simple feeding, increases throughput, reduces the thermal load of the samples and enables the use of finer sieve cassettes to achieve a higher final fineness – even for materials, which are otherwise difficult to comminute finely. The result: an especially fast and efficient comminution with minimised thermal load and significantly higher throughput – in addition to quick and easy cleaning.

Choose according to your needs:

FRITSCH small volume Cyclone separator

Especially for exhaustion of small sample quantities, we designed the compact FRITSCH small volume Cyclone separator. It is made of plastic, can be dismantled completely and cleaned in a dishwasher for reliably preventing contaminations. The comminuted sample is collected in a screwed-on sample glass of 250 or 500 ml volume.

FRITSCH high-performance Cyclone separator

The FRITSCH high-performance Cyclone separator completely made of stainless steel 304 is particularly indispensable in the analytical sector and in the food and pharmaceutical industries, and for the processing of heterogeneous mixtures of material, e.g. in the cement industry. Due to its high surface quality, it offers enhanced resistance to corrosive media such as alkalis and acids and is especially easy to clean with a wide range of possible cleaning agents, without leaving any residues. In addition, it can be completely dismantled, fully emptied, flooded and sterilised, and thus offers reliable protection against cross-contamination.

Especially convenient: The comminuted sample is drawn directly into the screwed-on sample glass or in a larger collecting vessel of up 60 litres, in which it can also be transported and stored.

Clean Design for unmatched ease of cleaning

Available only from FRITSCH: For residue-free cleaning all grinding parts of our Cutting Mills can be removed within seconds without tools – unbeatable fast, simple and efficient.

The result: a completely open, empty grinding chamber with minimised dead space and smooth interior walls for quick and easy cleaning and reliable protection against cross-contamination. Convince yourself of the unmatched ease of cleaning and watch the video.

Test the FRITSCH CUTTING MILLS!

Send us your most difficult sample – we will carry out an individual sample grinding for you. Compare for yourself!

 

 

Reader comments

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.

Post a Comment




Digital Edition

International Labmate July 2019

July 2019

In This Edition Mass Spectrometry & Spectroscopy - 67th ASMS Conference on Mass Spectrometry and Allied Topics - Modular MS Bench System with Integrated Gas Supply for Sciex LC-MS/MS Unveile...

View all digital editions

Events

AACC Annual Meeting & Clinical Lab Expo

Aug 04 2019 Anaheim, CA, USA

M&M 2019

Aug 04 2019 Portland, OR, USA

DXC 2019

Aug 05 2019 Lombard, IL, USA

ACS National Meeting & Expo, Fall 2019

Aug 25 2019 San Diego, CA, USA

Microscopy Conference 2019

Sep 01 2019 Berlin, Germany

View all events