E-Learning

Past Events

Precision, accuracy and robustness are key words and essential parameters to determine the effectiveness of any analytical application. Surveyors, refinery, and QC labs must determine the Nitrogen and Sulfur content with fewer personnel while the number of samples keep increasing and the time to report is under pressure. Moreover, all these analyses must be done in compliance with a variety of test methods, such as the ASTM D5453, ASTMD4629 and ASTM D6667. All these factors are pressing on...

View 16:00:00 20 Apr 2021

Are you tired of always searching for the latest Safety Data Sheet of a reagent? Are you tired of always having doubts about the up-to-dateness of a label? Are you tired of missing your mother tongue on a label? Are you tired of using a “non”-hazardous chemical which shows a high reactivity and does not smell healthy? Are you tired of working with obviously incorrectly classified self-made neat chemicals or mixtures? Are you tired of being flooded with useless information but not getting...

View 13:00:00 19 Nov 2020

This eLearning session will discuss the basics of Karl Fischer titration chemistry and the two types of titration, volumetric and coulometric. We will also discuss why one might be preferred over another and the reagents used for both volumetric and coulometric titrations. We will also cover method development and validation strategy. Finally we will provide some tips and tricks to help you be successful with your Karl Fischer titrations.  Participants will learn: An overview of the...

View 15:00:00 16 Sep 2020

Make the right decisions faster during your disinfection control and hygiene monitoring processes for food & beverage manufacturing. Hygiene monitoring, in-process testing and disinfection control – regardless of what you call this step it remains critical in ensuring the safety of your product. Join our webinar to learn the importance of Disinfection control of your production sites. Attention to hygiene during the manufacture of food and beverage products is paramount due to the eve...

View 07:00:00 30 Jun 2020

Due to contaminants complexity and the low amount at which pollutants are usually present in environmental samples, their analytical determination can be particularly challenging. Conventional sample preparation methods make use of large solvent volumes and involve intensive sample manipulation that can lead to sample contamination or losses of analytes. Even modern extraction technologies are expensive and offer limited productivity. To overcome these disadvantages, Milestone developed a rap...

View 13:00:00 21 May 2020

Having the support of a data management solution with intrinsic flexibility enables laboratories across all industries to increase productivity and efficiency. As the largest refiner in the U.S., Marathon Petroleum Corporation (MPC) needed a LIMS capable of centralizing the laboratory operations of multiple locations over three North American time zones.  At the same time, they needed a system that could meet the unique configuration needs of each site without sacrificing upgradability.  In...

View 16:00:00 20 May 2020

From source water to wastewater, this webcast will outline the importance of tracking carbon levels. The ability to obtain carbon data with an online or laboratory TOC analyzer is critical to understanding the effectiveness of a plant’s treatment process and identifying process impurities. SUEZ will share case studies that highlight how laboratory and online TOC analysis can be utilized to drive optimal performance.

View 14:00:00 28 Apr 2020

Gas chromatography with sulfur chemiluminescence detection (GC-SCD) is one of the most power analytical techniques for speciating and quantifying sulfur compounds in gases and volatile liquids. This technique is particularly useful for hydrocarbon sample matrices in which the presence of sulfur may present processing problems or needs to be known for regulatory purposes. Despite the utility of GC-SCD, the technique is known for its challenges, such as complications with sensitivity, selectivi...

View 19:00:00 05 Dec 2019

This eLearning session introduces the operating principle of the SCD, as well as the innovations brought by Shimadzu to improve the productivity and minimize the instrument downtime. You will learn the various features of Shimadzu SCD which make it a reliable tool for analysing sulfur-containing compounds down to the trace level. This is demonstrated with various samples, such as trace thiophene in benzene (ASTM D7011 and D4735), sulfur compounds in light petroleum liquids (ASTM D5623), in na...

View 13:00:00 10 Oct 2019

ppm water content in LPG and all gas mixtures can now be accurately determined by coulometric Karl Fischer titration.  The latest eLearning session presented by ECH Elektrochemie Halle explains in detail how this new ASTM procedure allows you to test ppm water in your laboratory and directly at the sample point.   The first question is, why is the water content of LPG and gas so important? Substances with corrosive promoting properties have to be monitored and kept to a minimum. Water is...

View 14:00:00 02 Oct 2019


Digital Edition

Labmate UK & Ireland November 2021

November 2021

In This Edition Articles - Advancements in Freeze drying production and the impacts on scale, sustainability and compliance - Face-to-face events finally start up - But how will attendance f...

View all digital editions

Events

LABWorld China 2021

Dec 16 2021 SNIEC Shanghai, China & online

Miconex

Dec 22 2021 Beijing, China

Nepal Lab - NEW DATES

Jan 13 2022 Kathmandu, Nepal

Smart Factory Expo

Jan 19 2022 Tokyo, Japan

View all events