Videos

Past Events

In this eLearning session we’ll give you tips and tricks for your daily density measurements to ensure that your density meter is in top condition and always ready to deliver repeatable and accurate results. In addition, we’ll give you an overview on how to achieve traceable, globally comparable, and correct density measurements. In particular, we’ll focus on the practical aspect in your daily routine. After the session, you’ll understand the difference between ISO 17025 and ISO...

View 13:00:00 14 Feb 2023

Small instruments and mobile phone-based analytical methods save time and improve data quality of point-of-sampling analyses. Quality and regulatory requirements have been creating an increasing need to monitor production processes in food and beverage production and in water processing. From an economic perspective, in-process testing is a valuable checkpoint to ensure that production processes are running smoothly, i.e. that product composition is consistent with desired values in terms of...

View 13:00:00 27 Sep 2022

PFASs (per- and polyfluorinated alkyl substances) are a class of almost 10.000 organofluorines. These man-made compounds - also designated «forever chemicals» – are highly persistent and at least some of them tend to accumulate and biomagnify in the environment. For that reason, more and more of these compounds are declared toxic as they pose a risk to human and environmental health. In a joint eLearning session, Theresa Steurer and Iris Reber from Metrohm International Headquarters,...

View 13:00:00 23 Jun 2022

In this eLearning session we describe the specific gravity measurement in the whole refining process- from upstream to downstream. We introduce the theoretical background to the technique, the advantages of digital measurement over traditional approaches and introduce the broad equipment solutions from Anton Paar.   We place a particular focus on the practical aspect of this parameter in the daily routine to ensure full compliance with ASTM D4052, D5002, D7777, D8188 & ISO 12185. Our densi...

View 13:00:00 05 May 2022

Gas chromatography (GC) is one of the most important analytical technologies, but its power relies on the availability of sensitive detectors, able to quantify a range of analytes as extensive as possible. This webinar will show the Pulsed Discharge Detector (PDD) to meet this demand by combining true universality in detection, with a broad dynamic range, and sensitivity down to the ppm and ppb range. After setting the PDD in relation to other detectors for GC, generally regarded as univer...

View 09:00:00 26 Apr 2022

This eLearning demonstrates how to consolidate routine analysis of multiple parameters on a modular platform. Increasing numbers of samples, multiple parameters to be determined, mandatory compliance with national and international standards – water works, bottlers of mineral water and some sectors of the process industry all face the same challenge: How to cope with more analytical tasks while human resources in the laboratory are limited? In this eLearning session we demonstrate how...

View 14:00:00 07 Apr 2022

Biofuels, mainly derived from vegetable oils or the fermentation of plant material, have gained importance over the last few decades as more sustainable and environmentally friendly alternatives to fossil fuels. However, the production of raw materials for biofuel production has led to significant deforestation and competition for agricultural farmland with traditional crops used as staple food for humans and animals. To mitigate effects, new sources like algae have been developed for biofuel...

View 16:00:00 03 Nov 2021

At our recent Air Quality and Emissions event, Dr. Lesley Sloss of the International Centre for Sustainable Carbon gave a 20-minute presentation outlining emerging approaches to the global challenge of monitoring mercuring. Dr. Sloss addresses: The global spread of mercury pollution Contemporary and historical regulation of mercury emissions Alternatives to direct, fleet-based monitoring Cutting-edge modelling software for the estimation of emissions

View 13:40:00 14 Oct 2021

At our recent Air Quality and Emissions event, David Graham of Uniper gave a 30-minute presentation outlining current standards for the quality assurance of mercury around the globe. Mr. Graham discusses: The similarities and differences between quality assurance procedures in the United States and Europe Type-testing requirements and measurement uncertainty Alternatives to current conventions in performing linear calibration The most effective methods for performing certifi...

View 13:40:00 14 Oct 2021

At our recent Air Quality and Emissions event, Dr. Johannes Pfingsten of VDZ gave a 10-minute presentation comparing methods for the monitoring of mercury emissions.   Dr. Pfingsten discusses: The advantages and disadvantages of the prevailing reference method, EN13211 Different methods for reducing the limit of quantification Prospects for the wider utilisation of sorbent-trap methods Controlling breakthrough at different concentrations

View 15:50:00 14 Oct 2021


Digital Edition

LMUK 49.7 Nov 2024

November 2024

News - Research & Events News   - News & Views Articles - They’re burning the labs... Spotlight Features - Incubators, Freezers & Cooling Equipment - Pumps, Valves & Liquid Hand...

View all digital editions

Events

analytica China

Nov 18 2024 Shanghai, China

Pharma Asia

Nov 20 2024 Karachi, Pakistan

Turkchem

Nov 27 2024 Istanbul, Turkey

Smart Factory Expo 2025

Jan 22 2025 Tokyo, Japan

Instrumentation Live

Jan 22 2025 Birmingham, UK

View all events