Flash point testing of ethanol content in cosmetic products

Flash point determination

Ethanol content determines the flash point in cosmetic products. A low flash point can be a safety issue not only in transportation but also during production, especially in summertime. The large quantities of ethanol required for production entail a major risk if the flash point temperature of the cosmetic product is lower than the ambient temperature. Therefore, to limit the amount of evaporating ethanol it is sometimes necessary and good practice to reduce the ethanol content in formulations during high-temperature seasons.

ABA 500, ABA 300, TAG 500, and TAG 300 are perfectly suited for measuring flash points of ethanol-containing samples. The impact of small changes in ethanol concentration can be tracked closely thanks to the high precision of our Abel and TAG flash point testers.

The following measurements show how the flash point is changed by adding only a small amount of ethanol to the original products. For the tests we used three different original cosmetic products:

• Aftershave (8% ethanol content)
• Skin cleaning agent (10% ethanol content)
• Vitamin C serum (15% ethanol content)

The following table shows the flash points that were found for the:

• Original samples
• Samples with 2% added ethanol
• Samples with added ethanol, taking the total ethanol content of each sample to 20%

Flash point tests were conducted with ABA 500 and the standard ISO 13736 test kit. Test kits with reduced sample volume are available for the ABA X00.

The test result is the barometric pressure corrected temperature.

More information online