Laboratory Products

  • Function Extension of the CORIO CP Models

Function Extension of the CORIO CP Models

Sep 02 2020 Read 536 Times

The “High- and Low-temperature Warning Function” extension in all CORIO CP models is JULABO’s answer to customer requirements regarding the protection of sensitive samples in temperature control applications. If the actual value deviates from the specified setpoint and exceeds/falls below a preset temperature range, the user receives a visual and acoustic signal as well as a warning message via the digital interface. The temperature control process is not interrupted. If the actual temperature returns into the target range, the warning message disappears. To avoid false warnings during the heating phase, monitoring is only carried out when the actual temperature has been maintained for more than three consecutive seconds.With immediate effect, all models of the CORIO CP series are equipped with this function ex works at no additional cost. A software update is available for older CORIO CP devices.

With the new CP models, the CORIO family has added powerful heating immersion circulators, refrigerated circulators, and heating circulators. The extended temperature range of -50°C to +200°C and a higher pump capacity of 27 l/min or 0.7 bar make the CORIO CP the ideal partner for the safe temperature control of simple external applications. In addition, the CORIO CP offers 3-point Absolute Temperature Calibration (ATC3) and guarantees the reliable compensation of temperature deviations even when used in larger baths.

Refrigerated Circulators of the New CORIO CP Series

The refrigerated circulators of the new CORIO CP series provide more robustness, more reliability, and more advantages. They are ideal for all standard tasks and routine work in your laboratory and underline JULABO's ambition to create pioneering technologies for modern users. Outstanding functionality, ergonomics, ease of use, and a modern design are available in user-oriented performance categories.

CP-200F, CP-201F, and CP-300F Models

Refrigerated circulators CP-200F, CP-201F, and CP-300F have a bath opening/bath depth of 13x 15/15 cm. Thanks to the optimized design of the cooling coil, even the smaller models score with more space in the bath and thus offer a larger filling volume of 3 to 4 litres. With a temperature range of -20°C to +200°C or -30°C to +200°C, the models guarantee short heat-up and cool-down times.

CP-600, CP-601F, and CP-900F Models

The CORIO CP-600F features a bath opening/bath depth of 22 x 15/15 cm, the CP-601F 22 x 15/20 cm, and the CP-900F 26 x 35/20 cm. Thanks to the optimised design of the cooling coil, the models offer more space in the bath with an enlarged filling volume of 5 to 7.5, 8 to 10, and 21 to 30 litres. With a temperature range of -35°C to +200°C or -38°C to +200°C, the models guarantee short heat-up and cool-down times.

CP-1000F and CP-1001F Models

The CORIO CP-1000F offers a bath opening/bath depth of 18 x 13/15 cm, and the CP-1001F of 35 x 41/30 cm. Thanks to the optimized design of the cooling coil, the models offer more space in the bath with a larger filling volume of 5 to 7.5 and 42 to 56 litres. With a temperature range of -50°C to +200°C or -38°C to +100°C, the models guarantee short heat-up and cool-down times.

Download brochure here.

Reader comments

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.

Post a Comment





Digital Edition

Measurement Analysis China 2021 Buyers Guide

November 2020

The following Buyers’ Guide has been produced by International Labmate Ltd. International Labmate have been publishing magazines for over 46 years. We now publish 9 laboratory, environmental and...

View all digital editions

Events

Expomed Eurasia - NEW DATES

Nov 05 2020 Istanbul, Turkey

Pharma Asia - NEW DATES

Nov 10 2020 Karachi, Pakistan

JASIS 2020

Nov 11 2020 Chiba City, Japan

International Solid Waste Management Summit

Nov 12 2020 Shanghai, China

SETAC North America

Nov 15 2020 Virtual event

View all events