Energy efficiency meets cooling performance

Temperature control and sterilising

Energy efficiency meets cooling performance

18 Nov, 2026

With the introduction of several new refrigerated circulators, JULABO now offers environmentally friendly and energy-efficient units across the entire performance range from 200 watts to 2.5 kW.

All devices in the CORIO, DYNEO and MAGIO series operate with natural refrigerants, making a significant contribution to climate protection.

The larger cooling units, starting at 800 watts of cooling capacity, offer impressive energy savings of up to 70 per cent: electronic expansion valves, speed-controlled compressors and fans allow usage-dependent power consumption. This results in significant operational cost savings in many application scenarios, leading to a faster amortisation of acquisition costs.

Despite delivering high performance, JULABO’s newest generation of refrigerated circulators is remarkably compact, making them space-efficient in laboratory surroundings.

Energy-efficient temperature control systems can significantly lower energy use, especially during periods when only partial-load operation is required. For many laboratory and industrial applications, the system works hard to reach a setpoint temperature quickly, but once achieved, only partial-load operation is needed to maintain it. Under these conditions, energy savings of up to 70 per cent are possible with advanced systems.

Conventional refrigerated circulators with cooling capacities below 500 watts generally use capillary tube systems, which consume less energy due to their low cooling capacity.

JULABO, a manufacturer of temperature control equipment, has incorporated electronic expansion valves into its refrigerated circulators with 600 watts or more capacity for improved energy efficiency. Their latest generation, including models like the MAGIO MS-1200F, features additional energy-saving technologies such as speed-controlled compressors and fans. These advancements make the MAGIO MS-1200F the first in its power range to offer these energy-saving capabilities.

Comparing the MAGIO MS-1200F to the MAGIO MS-1000F reveals substantial energy savings. In scenarios where the system operates at a lower partial load, the MAGIO MS-1200F consumes approximately 600 watts less energy. Even when operating at full capacity while cooling from +20°C to −20°C, it requires 150 watts less energy. The energy savings increase as cooling capacity demand decreases. In practical applications where systems rarely operate at full capacity continuously, typical energy savings range from 40 per cent to 60 per cent.

Amortisation: highlighting that for refrigerated circulators with capacities of 800 watts or more, energy savings quickly offset the higher initial costs. Based on a typical scenario where the partial load is around 50 per cent, the MAGIO MS-1200F saves approximately 400 watts per hour compared to the MAGIO MS-1000F. A rapid payback period is especially achievable in applications with higher usage and electricity costs.

Latest News

LMUK 51.7 Nov 2026

Explore our Digital Edition

Discover the latest news and research

Digital edition

Explore Our Other Sites

Envirotech Online
Vehicle-based methane detection system passes German suitability test
Explore more Arrow
Pollution Solutions Online
Large-scale liquefied biogas bunkering to become possible in the Port of Gothenburg in 2027
Explore more Arrow
Petro Online
PFAS reference standard combines ten analytes to support trace-level calibration
Explore more Arrow
Chromatography Today
High-load peptide purification
Explore more Arrow