Prevent Sterilising Cross Contamination
Sep 18 2019 Read 372 Times
The QCS 150 Pass-Through autoclave is the latest and smallest double-door laboratory autoclave to be introduced by Priorclave with double doors, has a 150 litre front loading stainless steel chamber and is configured to accommodate up to 20% more load capacity than other steam sterilisers of the same specified size.
Double-door autoclave often can be considered a bespoke design, albeit one that is created by adding a second door to a standard model. This is where the UK design and laboratory autoclave manufacturing centre of Priorclave is a success as it adapts a standard steam steriliser or develops a totally unique autoclave to meet customer requirements.
Although the QCS 150 laboratory autoclave was the first to leave the dedicated UK production facility, Priorclave is able to offer double-door autoclaves based around a number of its many standard models with chamber capacities up to 700 litres.
Each QCS 150 double-door laboratory autoclave is partly bespoke, Priorclave configuring the functionality of its on-board Tactrol® controller to suit lab requirements. A typical set-up could be that only one side of the double door steriliser has access to the full control system, the other side of the autoclave equipped with just a screen to show process status so that lab staff are continually aware when a job is complete and it is safe to remove the media or waste. Where there is concern about bio-hazardous material in the autoclave a microbiological filter can be fitted. Unfiltered condensate is returned to the autoclave for sterilisation.
The Tactrol® microprocessor provides easy yet variable settings of process time and temperature, all supported by graphic indication of cycle status. Just set the temperature and time required, select any options needed and press start, operation is fully automatic once the cycle has started. The tough, clear control panel displays continuously process status.
These robust designs have an uncompromising level of safety that includes interlocks preventing the simultaneous opening of doors at either end of the chamber. And the increase load capacity provides laboratories and research centres greater sterilising versatility where the scale of items to be sterilised may vary significantly, allowing both small and taller items abled to be processed in a single pass.
Since each installation site is different, it may require doors to be hinged on the left or right as well as consideration to location of electrical, water and drain services. This is where the in-depth knowledge of the Priorclave sales and service team is a value asset, they are always on hand to advise on critical installation issues, ensuring the autoclave build program accommodates local site requirements for a smooth path from delivery to installation and operation.
The overall design and build of the QCS 150 Pass-Through laboratory autoclaves take place at Priorclave’s UK manufacturing centre where it introduces a bulkhead mount at the correct position to facilitate a strong structural fix into a dividing wall between the sterile lab and non-sterile areas. Once installed the double-door Pass-Through Priorclave is the perfect partner working as an interface between sterile and non-sterile areas.
With a Priorclave pass-through (double-door) laboratory autoclave it is possible to maintain the integrity of laboratories and protect the surround environment by creating a sterile path for media and waste as it passes in and out of a sealed laboratory.
Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.
In This Edition Articles - Export experts talk Corona Virus - Automated cell counting shouldn’t cost the earth Laboratory Products - Spectrophotometer Linearity Validation - Analysi...
View all digital editions
Jun 11 2020 Brussels, Belgium
Jun 20 2020 San Diego, CA, USA
Jun 30 2020 Nuremberg, Germany
Jul 27 2020 Kintex, South Korea
Aug 02 2020 Milwaukee, Wisconsin, USA