AA, ICP or ICP-MS – Which Should I Use?

Atomic Absorption (AA), Inductively Coupled Plasma (ICP) and Ion Coupled Plasma Mass Spectrometry (ICP-MS) are three common techniques used for elemental analysis. Elemental analysis is where a sample is analysed to identify and quantify the individual elements or isotopes that make up the sample.

Atomic Absorption Spectrometry

Two main types of AA spectrometry are used and they differ according to the method used to heat the sample:

• FAAS; the sample is heated in a flame
• GFAAS; the sample is heated electrically in a graphite tube

A cathode lamp, chosen to match the chosen element, shines through the gaseous sample atoms on to a detector. The amount of light absorbed by the relevant sample atoms is measured and can be used to determine the quantity of those atoms present in the sample.

Ion Coupled Plasma Atomic Emission Spectrometry (ICP-AES or ICP)

ICP uses a plasma source to vaporize the sample so it breaks down into its individual atoms or ions. This excites the sample so that the atoms or ions emit photons at specific frequencies/wavelengths. A detector measures the intensity of the emitted light and from this the quantity of each atom in the sample can be calculated.

Ion Coupled Plasma Mass Spectrometry (ICP-MS)

ICP-MS is similar to ICP in that the sample is heated using a plasma source. But in ICP-MS, the ions themselves are detected. After the plasma they pass into a MS where they are separated according to their mass/charge ratio and then counted using a detector.

Questions to ask?

Some of the questions you need to consider when choosing a technique include:

• Which element are you trying to detect and in what sample matrix?
• What limits of detection do I need?
• What type of analysis do I need to carry out?
• Do I need to analyse multiple elements in a single sample?
• What levels of precision and accuracy do I need?
  • Are there regulatory considerations I need to take into account?
• How easy is the instrument to set-up, maintain and run?
• What are the costs?
  • Initial capital costs
  • Running costs
  • Maintenance and service costs

A few details of the different techniques are shown in the table below.

*Detection limits vary between elements.

Each of the techniques has their advantages and it can be a difficult choice to make. This article provides a more detailed overview of elemental analysis techniques: Overview of Most Commonly Used Analytical Techniques for Elemental Analysis and for details about the use of Elemental Analysis for environmental analysis take a look at this news article: Essential Environmental Applications for Trace Elemental Analysis.