cGMP Compliance Established for Nanoparticle Tracking Analysis to serve the Pharmaceutical Industry

Laboratory products

cGMP Compliance Established for Nanoparticle Tracking Analysis to serve the Pharmaceutical Industry

24 Jun, 2013

Published over 12 years ago. See the latest and most current information on Laboratory products.

NanoSight have announced that Particle Technology Labs, PTL, has established cGMP compliance for Nanoparticle Tracking Analysis, NTA, and this is now available on a contract basis to the pharmaceutical industry.  PTL’s NanoSight LM10-HSB instrument is certified cGMP as of 4 June, 2013.

With cGMP compliance established, NTA via PTL is now fully available to the pharmaceutical industry. NTA technology will broaden PTL’s analytical capabilities by allowing quantification of particle concentrations in the submicron range. In addition, NTA provides an orthogonal or alternate technique to traditional dynamic light scattering (DLS), which until now was PTL’s only technique capable of submicron particle size determination. While suitable for many samples, as with any particle sizing technique, DLS does present some specific limitations. Traditional DLS instruments typically have relatively high particle concentration requirements. The LM10-HSB, being two to three times more sensitive than DLS, can analyse concentrations of particles as low as 50 ppm. In addition, as a technique with an intensity-weighted measurement, DLS distributions may be biased towards the upper end by just a few large particles. NTA overcomes these limitations through its individual particle-by-particle counting. PTL’s access to NTA as an orthogonal technique will enable the validation of a hypothesis or questionable finding provided by the results of the DLS instruments obtained in-house.

William Kopesky, PTL’s Director of Analytical Services, has driven the process to be the first US laboratory with a cGMP compliant NTA. "We are excited to have this new technology in our laboratory. As a cGMP qualified instrument, the NanoSight LM10-HSB expands our capabilities to our regulated clients, providing them with an accurate particle concentration and size device in the submicron range.”

Continuing, Kopesky added, “NTA has significantly better resolution than DLS, as we have verified here at PTL. Its ability to count particles in the submicron range constitutes a paradigm shift. Access to NTA technology is a benefit for several applications. One example is California Proposition 65, which requires companies to test their products and materials for the existence of nano-sized particles. Thanks to the sensitivity of NTA technology, PTL can now detect an even lower level of submicron particles.”

ILM Guide 2026/27

Explore our Digital Edition

Discover the latest news and research

Digital edition

Explore Our Other Sites

Envirotech Online
New laser-based PPM gas analysis for environmental monitoring
Explore more Arrow
Pollution Solutions Online
Next-generation reverse osmosis membranes for more efficient and cost-effective seawater desalination
Explore more Arrow
Petro Online
New test method ASTM D8606 has been officially released
Explore more Arrow
Chromatography Today
Non-invasive flowmeters for real-time monitoring
Explore more Arrow