New Incubator CO2 Analyser Meets Researched user Demands - Gives Accurate and Independent CO2 Verification and is Easy to Use and Read

From independent research among users, Geotech has designed its new G100 incubator CO2 analyser. The G100 is an easy-to-use, handheld CO2 analyser with increased accuracy in the 0-20 percent range

and a bright, easily read display. Readings are stable thanks to inbuilt moisture removal. Timesaving twin-probes check incubator top and bottom temperatures and difference simultaneously. Increased memory

holds 1000 readings. Options include O2 and/or RH analysis, temperature probes, data logging, and USB-link software to download data, analyse and export it – and to enable Internet file exchange with

Geotech technical and customer support. The fully functional G100 is priced from £1000 (+VAT in UK) and is available from: www.geotech.co.uk

Research has ensured the G100 analyser is fully operable and configurable from its keypad and screen. Routine, back-to-factory service and re-calibration is recommended once a year. When due, the analyser

displays a time-for-service warning but continues to work normally.

Geotech’s New G100 Incubator CO2 Analyser (1) in its optional hard carry case to assist with protection and long operational life (2) with one of its two temperature probes for top and bottom temperatures simultaneously (3).

An optional ‘USB-link cable and G100 software package’ supports PC and Internet connectivity. This enables data download to a PC of the event log, user calibration and the data set for analysis, graphing, secure archiving and, if necessary, exporting to spreadsheet, word processors or e-mails. To assist users anywhere in the world, the USB-PC link and G100 software allow user settings also to be downloaded as

a PC file and e-mailed to Geotech for technical support and troubleshooting. This assists remote diagnostics and service support worldwide avoiding unnecessary return to factory. It also helps ensure continued use and minimal downtime and limits time-zone lag. If necessary, the analyser firmware can be ‘flashed’ with a new Geotech software release, via website downloaded, for continuous improvement. Technical specification, operational diagrams, user manual and more at: www.geotech.co.uk